STG Machine Certifications

By STG Machine October 9, 2019 No Comment
STG Machine Certifications

Understanding how to reduce manufacturing cost plays such an important role in the design process. We thought it would be helpful to share a few insights on how to reduce manufacturing cost, so here are some introductory concepts:

Reducing Costs Part 1: Material Sizing

The use of stock size is the first principle in how to reduce manufacturing costs. Allowing suppliers to use readily available stock material will dramatically reduce costs incurred by suppliers, and those savings will be passed onto the end customer. Always check what is readily available as some nominal sizes are not usually carried in stock and may require a special order. In addition many designers call out for purchases that require hardware such as bearings, fasteners and pins. Make sure that the required hardware is readily available otherwise custom-made hardware will have to be manufactured or ordered.

Reducing Costs Part 2: Large Tolerances

Tolerance is perhaps the most important factor in reducing manufacturing costs. Tolerance, manufacturing process and surface finish are all intertwined and influence the cost. Tighter tolerances may require pre-manufacturing processes to be performed to get the material ready for the supplier. Likewise post manufacturing processes may also be required to achieve the desired level of tolerances called out. Since parts having large tolerances can often be produced by multiple machines and automated to some extent, costs will be significantly less. Please refer to the diagram below which further explaining how costs and tolerance are directly correlated.

Reducing Costs Part 3: Breakeven Points

During the manufacturing process there is a certain amount of fixed time required for every job. Automation can help reduce manufacturing costs, but they all require initial time and money to be invested in fixtures, tooling, testing and programming. At some point there is a breakeven point to where automation beats out manual equipment. However, if the quantity is not there to justify the fixed costs of automation then the unit price will remain high. Every product has a different breakeven point and factors such as weight, area, volume, material type and various other performance ratios affect where the breakeven point is. Do some research about how your product or device is manufactured and figure out where the breakeven point is. Talking to suppliers and figuring out how a product can be made more effectively is a great place to start when considering how to reduce manufacturing costs.

Keep up to date get email updates

Stay tuned for the latest conpany news.

Our Office

We are located in Santa Clara, CA and we can ship anywhere in the world.

Contact Us

Drop us a line

You can contact us by filling in this form any time you need professional support.

Fill Our Form

Support

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus,

Resource Center